LED Lighting and Downlight Installation Brisbane

Lighting is one of the most impactful and cost-effective improvements you can make to a Brisbane property. The right lighting makes a home feel larger, warmer, and more inviting. In a commercial space it affects energy bills, staff productivity, and the impression you make on customers. AdVoltage Electrical installs and upgrades lighting across Brisbane — from LED downlight replacements to complete new lighting circuit design and installation.

LED Downlight Upgrades — Replace Your Halogens

If your home still has halogen downlights, you are paying significantly more for lighting than you need to. Halogen globes typically consume 50 watts each. A modern LED equivalent produces the same or better light output using just 8 to 12 watts — an energy saving of 75 to 85%. In a typical Brisbane home with 20 downlights, switching from halogen to LED can save $150 to $300 per year in electricity costs depending on usage and your energy tariff.

Beyond energy savings, LED downlights run much cooler than halogens. Halogen downlights generate substantial heat in the ceiling cavity, which degrades insulation and in poorly installed setups can pose a fire risk. LED downlights produce very little heat — far safer and less likely to interfere with ceiling insulation.

What’s Involved in a Downlight Upgrade?

• Confirming whether your existing transformers are compatible with LED globes — many older 12V halogen transformers are not compatible and need to be swapped out
• Selecting LED globes or integrated fittings appropriate for each space — colour temperature, beam angle, and lumen output
• Replacing each fitting and testing on completion

In most cases, a whole-home downlight upgrade is completed in a single visit.

Choosing the Right LED Downlights

Not all LED downlights are equal. Key specifications to consider:

• Colour temperature — Warm white (2700K–3000K) creates a relaxed residential feel. Cool white (4000K) suits kitchens, bathrooms, and workspaces. Daylight (5000K+) is used in commercial and task-lighting applications.
• Lumen output — The measure of actual light produced. A quality LED replacement for a 50W halogen should produce 600–800 lumens.
• Beam angle — Narrow beams (25–40°) create focused, directional light. Wide beams (60°+) provide broader ambient illumination.
• CRI (Colour Rendering Index) — A CRI of 80+ suits most applications; 90+ is recommended anywhere colour accuracy matters such as kitchens, bathrooms, and retail.

New Lighting Circuit Installation

Adding new lighting to a room, outdoor area, or renovated space requires a new circuit or an extension of an existing one. We design and install new lighting circuits for:

• Interior ambient and task lighting for new rooms or renovations
• Under-cabinet kitchen lighting
• Bathroom vanity and accent lighting
• Outdoor lighting — path lights, security lights, entertaining area lighting
• Garden and landscape feature lighting
• Shed and workshop lighting

All outdoor and bathroom lighting circuits use appropriate IP-rated fittings for wet or damp locations.

Feature and Accent Lighting

• LED strip lighting — under benchtops, in joinery reveals, along stairs, or as architectural highlights
• Pendant lighting — wiring and mounting points for pendant fittings
• Sensor-activated lighting — for security, convenience, or energy saving
• Dimmable lighting circuits — with compatible dimmers and globes (incompatible LEDs flicker or buzz on older dimmer switches)

Commercial Lighting

Commercial LED upgrades typically achieve payback within 12–24 months through energy savings alone. We install:

• LED panel and linear lighting for offices and retail spaces
• High-bay LED retrofits for warehouses, workshops, and industrial facilities
• Exterior and car park lighting
• Emergency and exit lighting installation and compliance testing
• Lighting control systems including occupancy sensors and daylight harvesting

LED Light Installation: What to Expect

Most LED light installation jobs in Brisbane homes take a few hours, not days. We confirm the fittings and layout with you first, check the existing wiring and transformers, then install, test and clean up in a single visit wherever possible.

• Like-for-like upgrades: swapping halogen or CFL downlights for sealed LED units using the existing cut-outs.
• New lighting points: adding downlights, pendants or strip lighting where there is no light today, including new wiring and switching.
• Dimming and control: fitting LED-compatible dimmers, sensors and smart switches so the lights do not flicker or buzz.

What Affects the Cost of LED Light Installation?

We quote a fixed price before we start. The main things that move the price are the number of fittings, whether new wiring or switches are needed, ceiling access (roof space, raked or high ceilings), the quality of fitting you choose, and whether old transformers or dimmers need replacing. For a firm figure, send us a rough count of lights and a photo of the room.

Outdoor and Garden LED Lighting

Brisbane homes live outdoors, so decks, patios, pools and garden paths are some of the most popular LED lighting jobs we do. Outdoor fittings need the right weatherproof (IP) rating and safety switch protection, and near the bay they need to stand up to salt air. We supply and install fittings suited to the conditions.

Why Brisbane Property Owners Choose AdVoltage Electrical